Blogs Home » Travel » Details to be Noticed in Use of ECCA Wire
  • BLOG_TAGS - #ECCA Wire
    • Last updated २०१९ अक्टोबर ९
    • ० comments, ४४ views, ० likes

More from xiuweetime

  • ० comments, ० likes
  • ० comments, ० likes
  • ० comments, ० likes

More Readings

  • ० comments, २५,५२४ views
  • ० comments, २०,२२२ views
  • ० comments, १९,३९६ views

Related Blogs

  • ० comments, ० likes
  • ० comments, ० likes
  • ० comments, ० likes

Archives

Details to be Noticed in Use of ECCA Wire

BLOG_POSTED_BY xiuweetime     २०१९ अक्टोबर ९    

We often see ECCA Wire(XINYU) in our life, but do you know what's wrong with using ECCA wire? Consumers should pay attention to the smoothness and smoothness of ECCA wire when selecting and purchasing wires. Insulation and sheath are not damaged, signs are clear, and hand molds do not feel greasy.

Seen from the cross-section of the wire, the thickness of the insulation or sheath should be evenly distributed over the entire circumference of the wire instead of the core, and the insulation or sheath should have a certain thickness. Users should pay attention to whether the wire diameter is consistent with the clear part of the certificate when selecting wires. If the conductor cross-section is very small, it is easy to short-circuit the conductor heating.

It is suggested that household lighting wires should be of a specification of 1.5 square millimeters or more, and household appliances such as air conditioners and microwave ovens should be of a specification of 2.5 square millimeters or more. Standard Use-Wiring should be standardized. BV single-core wire is best used for fixed wires to pass through pipelines.

Do not touch the ECCA wire in the wiring and do not touch the ECCA wire in the room decoration. Do not connect in the middle of the route; Do not touch the ECCA wire when it is connected to the junction box. While other electrical appliances, such as air conditioners, should be powered by single wires, while ECCA wire for weak and strong electricity should be kept at a certain distance.

Common faults of cable lines include mechanical damage, insulation damage, damp insulation, deterioration of insulation, overvoltage, cable overheating, etc. When a fault occurs, the power supply of the fault cable should be cut off, the fault point should be found, fault inspection and analysis should be carried out, then repair and test should be carried out, and the failure can be recovered after cutting off the power supply is eliminated.

If you are interested in our products, you can click Enameled Copper Clad Aluminum Wire to learn more information.